Skip to product information
1 of 5

Bestsellers New

Anqidi 6HP 2-Stroke Outboard Motor Fishing Boat Engine Tiller Shaft Water Cooling CDI System

Anqidi 6HP 2-Stroke Outboard Motor Fishing Boat Engine Tiller Shaft Water Cooling CDI System

Regular price $96.00 USD
Regular price Sale price $96.00 USD
Sale Sold out
Tax included. Shipping calculated at checkout.


  • Material: Aluminum Alloy
  • Color: Black
  • Surface Treatment: Spray Paint
  • Assembly Required: No
  • Number of Items: 1
  • Engine: 2-stroke 6hp
  • Displacement: 102cc
  • Gear Ratio: 2.08(27:13)
  • Number of Cylinder: 1
  • Max. Output: 4.4KW
  • Max. Speed: 4500-5500r/Min
  • Noise: About 80DB
  • Gear Positions: F-N-R
  • Ignition System: CDI
  • Cooling System: Water-cooling
  • Control System: Tiller Control
  • Starting System: Manual Start
  • Gasoline: No.92 Lead-free Gasoline
  • Fuel Type: Mixed Oil (50 Gasoline: 1 2-stroke Engine Oil)
  • Trim And Tilt System: Manual Tilt
  • Fuel Tank Capacity: 2.5L/0.66gal
  • Fuel Consumption Rate: 2.5L/0.66gal/h
  • Bore*Stroke: 5.5*4.3cm/2.16*1.7in
  • Propeller Diameter: 18cm/7in
  • Handle Length: 36cm/14.17in
  • Adaptive Transom Plate Height: ≤44cm/17.32in
  • Gross Weight: 24.15kg/53.24lbs
  • Net Weight: 20.55kg/45.3lbs
  • Product Size: 105*48*24cm/41.3*18.9*9.4in
  • Package Size: 110*37*54cm/43.3*14.56*21.26in

Package Included

  • 1x Outboard Motor
  • 1x Flameout Rope
  • 1x Tool Kit
  • 1x Fuel Oil Mixing Bottle
  • 1x Funnel
  • 1x English Manual
  • 1x English Operation Instructions
  • All Accessories for Assembly


1.Please carefully read the manual and strictly follow the precautions to have a better experience.

2.Please measure the height of your boat before purchasing to ensure suitability for this product.

3.Please start the motor in the water. If the motor stops circulating water . please stop using it immediately and check the impeller of the water pump to see if the water outlet is blocked.

4.Please note that this product should use a mixture of two-stroke engine oil and 92 # unleaded gasoline. The running-in period of the new machine is 10 hours . during which the fuel ratio is 30L (7.93 gal) of gasoline to 1L (0.26 gal) of engine oil. After 10 hours . the ratio is 50 liters (13.21 gallons) of gasoline to 1 liter (0.26 gallons) of oil.

5.Please note that the emergency shutdown rope should be inserted when the outboard motor is started . and the other end should be wrapped around your wrist or belt.

6.Please do not drive too fast during the running-in period. After the running-in period . the gear oil needs to be replaced . and the second replacement time is about 100 hours or 6 months later.

7.Please do not leave this product outside until the cooling water is completely used up. Otherwise . water will enter the cylinder through the exhaust port . leading to engine failure. After cruising in seawater or turbid water . please clean the outboard motor with fresh water and cool the water channel with fresh water. The engine should be stored in a dry and well-ventilated place . and avoid direct exposure to sunlight.

8.If not in use for a long time . please thoroughly clean the gasoline in the fuel tank.

9.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement . and make sure you do not mind before you order.

View full details